Activating Color Flow - GE Logiq 500 User Manual

Adding Color

Activating Color Flow

To activate Color Flow Mapping, press the CFM key (color
flow). The key backlights while in Color Flow Mode. The color
flow image appears after a short pause.
Color Flow Mapping can be used with B-Mode, M-Mode or
Doppler Imaging.
In B-Mode, the Color Flow information overlays the B-Mode
image.
The Scan Area key and Trackball now control the size and
position of the color flow window.
M-Mode
In M-Mode, the color flow information overlays the B-Mode
image. The color displayed in the M-Mode is that which is seen
along the timeline cursor.
The Color Map selected for B-Mode applies to M-Mode. The
size and position of the color flow window in B-Mode
determines the color information displayed in M-Mode.
Exiting Color Flow
To exit Color, press CFM (color flow).
5–26 LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0