Deactivating The Probe - GE Logiq 500 User Manual

Probes
Probe Name Menu
If the Display Probe Name preset in the Setup/System
Parameters page one is ON, by pressing a half bright or brightly
lit key causes the probe names for each port to be displayed in
the soft menu. The desired probe can then be selected from
the soft menu or by pressing the Probe Select keys. Press the
Mode Top Menu key to exit the probe name display.

Deactivating the Probe

When deactivating the probe, the probe is automatically placed
in standby mode.
To deactivate a probe:
S
" A
y
S
S
S
3–32
B Preset Set Up
C364 L739 ????
(1) (2) (3)
Figure 3–21. Probe Name Menu
Press the Freeze key.
Gently wipe the excess gel from the face of the probe.
Carefully slide the probe around the right side of the
keyboard, toward the probe holder.
Ensure that the probe is placed gently in the probe holder.
ECG
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0