System Positioning/Transporting; Moving The System - GE Logiq 500 User Manual

Hide thumbs Also See for Logiq 500:

Table of Contents

System Positioning/Transporting

When moving or transporting the system, follow the precautions

below to ensure the maximum safety for personnel, the system,

and other equipment.

Before moving the system:

To prevent damage to the Power Cord, DO NOT pull

excessively on the cord or make sharp bends while wrapping.

500 Basic Users Manual

2233658–100 Rev. 0

System Positioning/Transporting

1. Turn the system power switch off.

2. Unplug the power cord.

3. All cables from off-board peripheral devices (IIE

camera, external printer, VCR, etc.) must be

disconnected from the console.

4. Ensure that no loose items are left on the console.

5. Loop the cord around the handle on the back of the

system or wrap the cord in a bundle and store it behind

the rear storage panel.