Doppler Optimization - GE Logiq 500 User Manual

Doppler
.

Doppler Optimization

NOTE: This section discusses the Pulsed Doppler controls and
menu selections. If Continuous Wave Doppler is being used
the keyboard controls are the same. Selections found in the
CWD soft menu function the same as a like selection in the
PWD soft menu.
Controls
Doppler Mode controls discussed in this section are shown
below:
Figure 5–19. Doppler/CFM Controls
These functions are specific to pulsed or continuous wave
Doppler when that mode is active, as well as color flow.
If the color flow mode is enabled while in Doppler, the Select
key switches the Doppler/CFM controls between Doppler and
CFM.
5–50
V
m/s
q
LOGIQ 500 Basic Users Manual
" A
2233658–100 Rev. 0