Naming A User Preset - GE Logiq 500 User Manual

Naming a User Preset

To give the user preset a name instead of a number:
While in a Custom Display or Preset Program menu page, use
the Trackball to move the arrow cursor over the Preset Name
area. Press Set.
Type in the desired name for the User Preset in the designated
exam category.
Use the Trackball to move the arrow cursor to SAVE and press
Set.
.
Answer Yes to the question " Overwrite existing data? 'Y' or 'N' "
to save the new User Preset name.
IMPORTANT NOTE: To ensure that all parameters and the
user preset name are saved by the LOGIQ 500 before exiting
the Set Up function:
These steps are important to ensure that the new user preset
name is saved.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
S
select System Parameters, any menu pages 1/7
through 7/7.
S
Trackball to the SAVE function in the System
Parameters menu and press Set.
S IMPORTANT: Answer 'Y' to overwrite existing data
again.
Exam Applications Presets
14–95