Imaging Parameter 14) - GE Logiq 500 User Manual

Page 14 of 18 (Imaging Parameter 14)
D Image Processing EC
Choose the desired type of Doppler spectrum image processing.
Black Holes Filling Reduce the noise in the Doppler spectrum by filling in vertically.
Normal
Smoothing
Leveling
D Time Resolution EC, UP
Choose the amount of emphasis to be placed on Doppler time resolution as compared
to frequency resolution.
1 Time resolution much greater than frequency resolution.
2 Time resolution slightly greater than frequency resolution.
3 Frequency resolution slightly greater than time resolution.
4 Frequency resolution much greater than time resolution.
5 Frequency resolution the greatest compared to time resolution.
D Audio to Speaker EC
Choose the default type of Doppler audio to be sent to the speakers.
Stereo
Mono–F
Mono–R
D Audio Volume [%] EC, R
Choose the default percentage value for the Doppler volume to the speakers.
Percentage from 0 to 100% in 4 digit steps.
D Video Inverse EC
Choose the default type of video used to display the Doppler spectrum.
Off White on black.
On Black on white.
Display Dop Frequency
Choose the default setting for the Doppler Frequency display.
On or Off.
Display Dop PRF EC
Choose the default setting for the Doppler PRF display on the left side of the monitor.
On or Off.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
Standard Processing. No additional filtering to reduce noise.
Reduce the noise in the Doppler spectrum by filling in vertically and
horizontally.
Reduce the noise for Doppler spectrum direction.
Forward & Reverse signals separate.
Forward signals only.
Reverse signals only.
EC
Custom Display
14–39