Probe Discussion; Introduction - GE Logiq 500 User Manual

Introduction

The LOGIQ
S
S
S
S
Probe naming conventions
C364
L
Array Aperture (mm)
Center Frequency
Type
CWD2
Center Frequency
Type
* Type can be a prefix or a suffix
Table 15–7. Probe Naming Conventions
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0

Probe Discussion

500 supports four types of probes:
Curved Array (Convex). Curved Array (Convex) probes,
including 'micro' convex, are usually designated by the
prefix/suffix "C"; the endocavity probe is designated by the
prefix/suffix "E".
Linear Array. Linear Array probes are designated by the
prefix/suffix "L"; the linear intra-operative probes are
designated by the prefix/suffix "I" or "T".
Phased Array Sector. Phased Array Sector probes are
designated by the prefix/suffix "S"; the biplane TEE probe is
designated by the prefix/suffix "B"; the multi-plane TEE
probe is designated by the prefix/suffix "P".
Continuous Wave Doppler. Continuous Wave Doppler
probes are designated by the prefix/suffix "CWD".
*Type
B
C
CWD
E
I
L
P
S
T
Probe Discussion
TYPE
Biplane TEE
Convex
Pencil CWD
Endo (TR/TV)
I–shaped intra–operative
Linear
Multiplane TEE
Sector
T–shaped intra–operative
15–19