Probe Handling And Infection Control - GE Logiq 500 User Manual

Probe Overview

Probe handling and infection control

This information is intended to increase user awareness of the
risks of disease transmission associated with using this
equipment and provide guidance in making decisions directly
affecting the safety of the patient as well as the equipment user.
Diagnostic ultrasound systems utilize ultrasound energy that
must be coupled to the patient by direct physical contact.
Depending on the type of examination, this contact occurs with
a variety of tissues ranging from intact skin in a routine exam to
recirculating blood in a surgical procedure. The level of risk of
infection varies greatly with the type of contact.
One of the most effective ways to prevent transmission
between patients is with single use or disposable devices.
However, ultrasound transducers are complex and expensive
devices that must be reused between patients. It is very
important, therefore, to minimize the risk of disease
transmission by using barriers and through proper processing
between patients.
Adequate cleaning and disinfection are necessary to prevent
CAUTION
disease transmission. It is the responsibility of the equipment
user to verify and maintain the effectiveness of the infection
control procedures in use. Always use sterile, legally marketed
probe sheaths for intra-cavitary and intra-operative procedures.
For neurological intra-operative procedures, use of a legally
marketed, sterile, pyrogen free probe sheath is REQUIRED.
Probes for neuro surgical use must not be sterilized with liquid
chemical sterilants because of the possibility of neuro toxic
residues remaining on the probe.
15–12 LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0