Gyn Measurements; B-Mode - GE Logiq 500 User Manual

GYN Measurements

B-Mode

Ovarian Length, Height, and Width
The length, height and width of the left and right ovaries can be
measured and recorded on the GYN summary report.
Each measurement is a typical distance measurement made on
a B-Mode image in the appropriate scan plane.
Typically, the height and width are measured on the axial plane
while the length is measured on the sagittal plane.
To measure ovarian length:
Scan the patient's right or left ovary in the sagittal plane.
Lt Ov–L
Rt Ov–L
Figure 9–14. GYN Calculation Sub-Menu
Select Rt Ov-L or Lt Ov-L from the GYN Calculation
Sub-Menu. Perform a standard distance measurement as
described in 7–7 .
To measure ovarian height and width:
Scan the patient's right or left ovary in the axial plane.
Select Rt Ov-H, Rt Ov-W, Lt Ov-H or Lt Ov-W from the GYN
Calculation Sub-Menu. Perform the necessary distance
measurements as described in 7–7 .
9–40
GYN Measurements
Lt Ov–H Lt Ov–W
Rt Ov–H Rt Ov–W GYN
Report
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0