Operation Guide Message Description - GE Logiq 500 User Manual

Troubleshooting

Operation Guide Message Description

Category
Scan Guide Invalid CFM image was
cleared.
Miscellaneous In progress. Please
wait.
VCR Search Guide Searching.
Search was completed.
Requested information
doesn't exist on the tape.
Requested information
doesn't exist in System.
Can not read Tape ID.
Register the new tape?
(y/n)
Retry to read Tape ID?
(y/n)
Please play VCR image
and freeze at the other
frame.
Save patient information
on VCR Tape? (y/n)
Save patient information
to System? (y/n)
System ID = #####
Tape ID = #####
System ID = #####
New Tape ID = #####
Table 16–5. Operation Guide Message Description
16–32
Problem/ Possible
Message Cause
The PRF is changed,
and invalid CFM image
is cleared.
The system needs
several seconds to do
something.
The VCR is searching
the tape.
The VCR search is
completed.
The patient image
doesn't exist on the tape.
The information doesn't
exist on the hard drive.
The tape ID cannot be
read.
The tape ID cannot be
read.
The operator has retried
to read the tape ID.
Operator pressed key for
saving patient
information on the VCR
tape.
Operator pressed key for
saving patient
information on the hard
drive.
Tape was mounted or
the new tape was
registered.
The tape was mounted.
Possible
Corrective Action
NA
NA
NA
NA
Perform a system
search.
Check all patient
information.
"Yes" to register new
tape, "No" to cancel.
"Yes" to retry, "No" to
cancel.
Press Play and Freeze.
"Yes" to continue, "No" to
cancel.
"Yes" to save, "No" to
cancel.
NA
NA
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0