Ob Graph Selection - GE Logiq 500 User Manual

OB Graph Selection

OB Graph is a factory default selection in the measurement
menus. Select OB Graph from the Measurement Menu.
.
Figure 9–13. Basic OB Graph Display (Osaka University)
NOTE: The label in the upper left corner of the graph indicates
the standard deviation used to plot the graph.
OB Graph Labeling
Refer to the Advanced Reference Manual for the labeling found
in the OB Graph for standard deviation.
Changing OB Graph Selection
After the OB graph has been displayed, the user can change or
select which measurement parameter is to be used to display a
graph.
Highlight CHANGE GRAPH and press Return. The graphic is
deleted and a measurement selection menu appears.
Select the desired measurement value and press Return. The
new measurements, calculations and graphic are displayed.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
OB Graphs
9–37