System Setup - Recording) - GE Logiq 500 User Manual

Page 5 of 7 (System Setup – Recording)
Report Video Inverse to Printer
Choose to send calculation summary report video to the print device in inverse (reverse)
video.
On or Off.
Record 1 B&W or Color
Choose the type of device to be controlled by the Record 1 key for black and white or
color images. Use the Ellipse rocker switch to cycle through the selections.
Black and White Polaroid Camera, Color Polaroid Camera, Black and White Printer,
Color Printer, Multi Image Camera, Image Archive or Computer.
Record 2 B&W or Color
Choose the type of device to be controlled by the Record 2 key for black and white or
color images. Use the Ellipse rocker switch to cycle through the selections.
Black and White Polaroid Camera, Color Polaroid Camera, Black and White Printer,
Color Printer, Multi Image Camera, Image Archive or Computer.
Report
Choose the type of device that will be used to print the calculation summary report
pages.
Black and White Polaroid Camera, Color Polaroid Camera, Black and White Printer,
Color Printer, Multi Image Camera or Image Archive.
External Video Signal
Choose the type of video signal, from an external source, that is being put into the
LOGIQ 500.
S-Video
RGB
Col-Comp
Color Printer Type
Choose the type of color printer (option) that is attached to the LOGIQ
UP3030
UP1850
UP1850P
Color Printer Memory
Choose how printer memory will be divided and thus how the color print will be
formatted.
Single
Quad–Frm
Quad–Frmls
UP-1800 Series/UP-2800 Series/UP-2900 Series
UP-1850 Series/UP-2850 Series/UP-2950 Series
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
Two component video.
Red, green, blue and sync.
Composite color signal.
Sony UP-3030MD.
Sony UP-1800/UP-1850/UP-2950/UP-2850.
Sony UP–1850P.
One picture per sheet.
Four pictures per sheet.
Not available.
System Parameters
500.
Single Quad–FRM
Available Not Available
Available Available
14–59