Id/Name - GE Logiq 500 User Manual

.
Beginning a New Patient (cont'd)
NOTE: If patient information needs to be edited or the exam
category changed, use the ID Name key. Pressing ID Name
.
allows for modification of the Patient Entry Menus without
erasing accumulated patient images, measurements,
annotations, calculations and summary reports.
NOTE: Patient age entry information (years, months, weeks,
days) is selected in Set Up/Preset Program page 10, "Display
Unit Age". Patient height is "Display Unit Height" and Patient
weight is "Display Unit Weight". Choose the unit values that are
to appear on the patient entry menu.
OB/GYN Exam Categories
BBT is a pregnancy origin data selection choice that appears in
the Tokyo University, Osaka University and European OB
formats only. LMP, EDC and GA are the only choices in the
USA version.
If the Multigestational option is installed, "Fetus Number:" will
appear to the right of Ref. MD:. If there is more than one fetus,
enter the correct number of fetuses. If the Multigestational
option is not installed, each fetus must be scanned separately.
Re-enter the patient's information for each fetus.

ID/Name

The ID/Name key functions the same as the New Patient key
except it does NOT erase previous patient data (i.e.
measurements, calculations, etc.) Use the ID/Name key to
enter or replace patient data without changing the current status
of the system. One common reason might be to change the
exam category.
Pressing ID/Name enables the Patient Entry Menu.
Edit the menu as described in Beginning a New Patient .
No other function can be started until ID/Name is completed.
To complete the ID/Name process, press ID/Name a second
time or move the highlighted cursor to Exit and press Return.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
Beginning an Exam
4–5