Measurement Controls - GE Logiq 500 User Manual

Measurement Controls

Figure 7–1. Locating Measurement Controls
Measurement The Measurement key is used to enable all types of basic
measurements. It displays the measurement and calculation
soft menu for the current exam category.
Ellipse The Ellipse rocker switch is used to activate the ellipse
measurement function after the first distance measurement has
been set. It also toggles which cursor is the movable cursor
during the ellipse adjustment.
Trackball Used to move the measurement cursors.
Set Fixes the cursor for measurements or completes the
measurement sequence.
Clear Erases measuring cursor and measurement data from the
display during a measurement sequence. Clears all cursors
and measurements from the display when not performing a
measurement sequence.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
Introduction
7–3