Deleting User Define Functions; Saving User Define Functions - GE Logiq 500 User Manual

User Define Function

Deleting User Define Functions

To delete a User Define or A/N key sequence:
S
S
S
S
S
A User Define or A/N key can also be re-programmed by writing
over (replacing) the existing sequence.

Saving User Define Functions

All user define functions can be saved to MOD by using
Setup/Utilities/User Data Back Up/Save. The data can be
loaded back on to the system in the event of a hard drive
failure.
14–102
Ensure that the User Define or A/N key to be deleted is
unlocked.
Select Set Up Top Menu.
Select User Define function.
Press the User Define or A/N key number to be deleted.
Press 'Y' (for Yes) to overwrite current data.
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0