4
After the sensor is connected, the following
window appears.
The Main pane appears on the Edit pane. The
sensor starts up in RUN mode.
Adding a sensor to a project
After the project is created, additional sensors can be added to the project.
Explorer pane
Entering project information
Comments about the project can be entered.
Explorer pane
Edit pane
1
Enter comments for the project in the [Comment] field.
ZW User's Manual
: [Device Group] (right click) | [Add]
: [Device Group] | [(Sensor Name)] (double click)
: [General Settings] icon (
)
Launching a project
51