4-4 Setting the Banks
Changing the Bank Mode
Select the bank contents to be obtained from the settings or judgment value.
Item
Setting item
Sensor settings
Bank mode
1
Set the operating mode to the FUNC mode.
3-3 Switching operation modes p.85
Explorer pane
→ Edit pane
2
Select the bank mode from [Bank mode].
Note
The bank mode can also be set by the operating keys on the Sensor Controller.
Changing the Bank Mode p.221
ZW-7000 User's Manual
Setting value
Description
Normal (default
Sensing setting, measurement setting and I/O setting that are set in the FUNC
value)
mode are regarded as bank data. The number of banks is up to eight.
Judgement
Only the threshold value under the measurement setting is regarded as bank
value
data. The number of banks increases up to 32.
: [System] (double-click)
: [Sensor Settings] icon (
)
133
Setting the Banks