Omron FH series User Manual page 63

Note
Communications are set up as shown below when you use the multi-line random-trigger mode.
Settings on
Communications
the window
Module setting
for line 0
Set [Fieldbus] to [EtherCAT].
Communications
Settings on
Module setting
the window
for line 1
Set [Fieldbus] to [EtherCAT].
Settings on
Communications
the window
Module setting
for line 7
Set [Fieldbus] to [EtherCAT].
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Communications
specifications settings
• The communications settings
(e.g., communications cycle):
Are the same for all lines.
• Number of output data bytes
(output size):
Set for each line.
EtherCAT Connections (FH-1000 series/FH-3000 series only)
Output data
designation
Output data
designation
The output data is designated
according to the output data
size that was set on the
window for line 0.
Output data
designation
The output data is designated
according to the output data
size that was set on the
window for line 0.
2
61