Omron FH series User Manual page 226

Setting item
Address Settings
Address Settings is only for the following series:
• FH-1000 series (4, 8 camera type)
• FH-3000 series (4, 8 camera type)
• FZ5 series Sensor Controller
• Obtain an IP address automatically
• [Use the following IP address]
IP address
Subnet mask
Default gateway
DNS server
Preferred WINS
server
Alternate WINS
server
224
Communicating with EtherNet/IP
Set value
[Factory default]
Set the IP address of the top Ethernet port on the Sensor Con-
troller.
Set the IP address of the Sensor Controller.
When [Obtain an IP address automatically] is selected, the IP
address of the Sensor Controller will be automatically
obtained.
When [Use the following IP address] is selected, set the IP
address, subnet mask, and the default gateway address.
a.b.c.d
a: 1 to 223
b: 0 to 255
Input the IP address of the Sensor Controller.
c: 0 to 255
d: 2 to 254
[10.5.5.100]
0.0.0.0 to
255.255.255.255 Input the subnet mask address.
[255.255.255.0]
a.b.c.d
a: 1 to 223
b: 0 to 255
Input the default gateway address.
c: 0 to 255
d: 0 to 255
[10.5.5.100]
a.b.c.d
a: 1 to 223
b: 0 to 255
Input the DNS server address.
c: 0 to 255
d: 0 to 255
[10.5.5.100]
a.b.c.d
a: 1 to 223
b: 0 to 255
Inputs address of WINS server.
c: 0 to 255
d: 0 to 255
[0.0.0.0.]
a.b.c.d
a: 1 to 223
b: 0 to 255
Inputs address of WINS server.
c: 0 to 255
d: 0 to 255
[0.0.0.0]
Description
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)