Omron FH series User Manual page 416

Changes Settings Related to Image Logging
Changes settings related to image logging.
Command (PLC to Sensor Controller)
First word in Command
Command Area code
+2 4000
+3 0050
+4 0000
+5 0000
+6 0000
+7 0000
: 0000
: 0000
*1: If the name of a folder that does not exist is specified, a new folder will be created.
*2: Regarding the storage destination folder
The storage destination folder differ according to the Sensor Controller series.
• FH series/FZ5-1100 series
RAM disk: C:\Data\RAMDisk
External memory device: E:\, F:\
• Do not save to the any folder except RAMDisk and external memory device (such as C:\ProgramFiles\FZ).
It is possible not to perform correctly due to the decrease of Scene data storage region.
• FZ5-L series/FZ5-600 series
RAM disk: \RAMDisk
External memory device: \USBDisk, \USBDisk2
Response (Sensor Controller to PLC)
First word in Command
Response Area code
+2 4000
+3 0050
+4 0000
+5 0000
414
Command Control
Bit
12 to 15 8 to 11 4 to 7
0100 0000 0000
0000 0000 0101
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
Bit
12 to 15 8 to 11 4 to 7
0100 0000 0000
0000 0000 0101
0000 0000 0000
0000 0000 0000
0 to 3
0000
Command code
0000
0000 [Identifier 0] [Identifier 1] [Set value]
[Identifier 0]: Logging
0000
[Identifier 1]: Identifier of settings data to set and
0000
set value
Separate the setting name and set value with 00
0000
(NULL).
0000
• ImageLogging + 0 (do not save)/1 (save only
NG)/2 (save all)
• imageLoggingDirectory (image logging folder
name) + folder_name
alphanumeric characters)
• imageLoggingHeader +
Prefix_for_image_logging_file_name (single-
0000
byte alphanumeric characters)
• DataLogging + 0 (do not save)/1 (save only
NG)/2 (save all)
• dataLoggingDirectory (data logging folder
name) + folder_name (single-byte
alphanumeric characters)
0 to 3
0000
Command code
Response target command codes
0000
0000 Response code
Command execution result
OK: 0(0000 0000)
0000
NG: Not 0 (0000 0000)
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Description
(*1)(*2)
(single-byte
Description