Omron FH series User Manual page 170

Setting
item
Address Settings
Address Settings is only for the following series:
• FH-1000 series (4, 8 camera type)
• FH-3000 series (4, 8 camera type)
• FZ5 series Sensor Controller
• Obtain an IP address automatically
• [Use the following IP address]
IP address
Subnet mask
Default gateway
DNS server
Preferred WINS server
Alternate WINS server
168
Communicating with PLC Link
Set value [Factory default]
a.b.c.d
a: 1 to 223
b: 0 to 255
c: 0 to 255
d: 2 to 254
[10.5.5.100]
0.0.0.0 to
255.255.255.255
[255.255.255.0]
a.b.c.d
a: 1 to 223
b: 0 to 255
c: 0 to 255
d: 0 to 255
[10.5.5.100]
a.b.c.d
a: 1 to 223
b: 0 to 255
c: 0 to 255
d: 0 to 255
[10.5.5.100]
a.b.c.d
a: 1 to 223
b: 0 to 255
c: 0 to 255
d: 0 to 255
[0.0.0.0.]
a.b.c.d
a: 1 to 223
b: 0 to 255
c: 0 to 255
d: 0 to 255
[0.0.0.0]
Description
Set the IP address of the top Ethernet port on the
Sensor Controller.
Use the following IP address When [Obtain an IP
address automatically] is selected, the IP address of
the Sensor Controller will be automatically obtained.
When [Use the following IP address] is selected, set
the IP address, subnet mask, and the default gate-
way address.
Input the IP address of the Sensor Controller.
Input the subnet mask address.
Input the default gateway address.
Input the DNS server address.
Inputs address of WINS server.
Inputs address of WINS server.
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)