SCNLOAD
Reads scene data.
<Command format>
S C N L O A D
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Scene No.
Specifies the scene No. to be read (0 to 127)
The name of the file containing the Scene data you wish to load.
Specify the file name as an absolute path.
The file name needs the "SCN" extension.
The file which has "SCN" extension can be load.
File name of scene
The load destination to use differs by Sensor Controller model.
data
Load destination
RAMDisk
External memory
IMPORTANT
• Do not turn off power to the Sensor Controller until there is a response.
(Example)
When you load the following case to the Sensor Controller as Scene 2:
• SCNLOAD folder name: LABEL1.SCN
• Drive name: USBDisk2
• Folder name of the external memory: IMG01
<Command>
<Response>
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
C
R
File name of scene data
Scene No. (3 digits max.)
FH series/FZ5-1100 series
C:\Data\RAMDisk
E:\, F:\, G:\, H:\, M:\ (FH series only)
\
\
\
FZ5-L series/FZ5-600 series
\RAMDISK
\USBDisk to \USBDisk3
Command Control
3
501