Omron FH series User Manual page 410

Response (Sensor Controller to PLC)
First word in Command
Response Area code
+2 4000
+3 0040
+4 -
+5 -
+6 -
+7 -
+8 -
+9 -
: -
: -
*1: Regarding the storage destination folder
The storage destination folder differ according to the Sensor Controller series.
• FH series/FZ5-1100 series
RAM disk: C:\Data\RAMDisk
External memory device: E:\, F:\
• Do not save to the any folder except RAMDisk and external memory device (such as C:\ProgramFiles\FZ).
It is possible not to perform correctly due to the decrease of Scene data storage region.
• FZ5-L series/FZ5-600 series
RAM disk: \RAMDisk
External memory device: \USBDisk, \USBDisk2
Getting Image Logging Folder Name
Gets the image logging folder name
Command (PLC to Sensor Controller)
First word in Command
Command Area code
+2 4010
+3 0040
408
Command Control
Bit
12 to 15 8 to 11 4 to 7
0100 0000 0000
0000 0000 0100
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
Bit
12 to 15 8 to 11 4 to 7
0100 0000 0001
0000 0000 0100
0 to 3
0000
Command code
Response target command codes
0000
0000 Response code
Command execution result
OK: 0(0000 0000)
0000
NG: Not 0 (0000 0000)
0000 [Identifier 0][Identifier 1]
[Identifier 0]: Logging
0000
[Identifier 1]: Identifier of setting to obtain
0000
• For imageLogging (image log): 0 (will not
save), 1 (save when NG), 2 (save all)
0000
• For imageLoggingDirectory (image log saving
0000
destination folder name): Destination folder
*1
name (half-width alphanumeric)
• For imageLoggingHeader (prefix of image log
file name): Prefix of image log file name (half-
width alphanumeric)
0000
• For dataLogging (data logging): 0 (will not
save), 1 (save when NG), 2 (save all)
• For dataLoggingDirectory: saving destination
folder name (half-width alphanumeric)
0 to 3
0000
Command code
0000
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Description
Description