Omron FH series User Manual page 436

Setting the data logging folder name
Sets the data logging folder name.
<Command format>
D A T A L O G F O L D E
or
D L F
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Data logging folder
name
*1: Do not specify a save destination other than RAMDisk or External memory, i.e. C:\ProgramFiles\FZ
The saved Scene data area may be reduced and the Sensor Controller will not perform correctly.
(Example)
When setting the data logging folder name to "USBDisk"
<Command>
<Response>
434
Command Control
R
C
R
Data logging folder name (128 characters max.)
The name of the file containing the data when data logging performs.
Specify the file name as an absolute path.
The save destination to use differs by Sensor Controller model.
Save destination FH series/FZ5-1100 series
RAMDisk C:\Data\RAMDisk
External memory E:\, F:\, G:\, H:\, M:\ (FH series only)
C
R
Data logging folder name (128 characters max.)
*1
FZ5-L series/FZ5-600 series
\RAMDISK
\USBDisk to \USBDisk3
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)