Omron FH series User Manual page 335

Command Lists
The commands and command formats are described in the following tables.
One Line
Data
Performs measurement
Continuous
continuously while com-
Measurement
mand is being input.
Changes the measure-
Select Scene
ment scene.
Set Scene Changes the measure-
Group ment scene groups.
Clears measurement val-
Clear Measure- ues.
ment Values The OR signal and DO sig-
nal are not cleared.
Clears the error output.
Clear Error The ERROR indicator is
also cleared.
Clear Parallel Clears the OR signal and
OR+DO DO signal.
Clears the wait state in the
Wait State Clear control flow parallel pro-
cessing unit.
0: OFF
1: ON
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Description
Execute (DI7)
1
1
1
1
1
1
1
Input format (DI7 to DI0)
Command
Command
information (DI4 to
(DI6, DI5)
DI0)
*****
The Controller does not
00 see this signal, so a set-
ting of either 0 or 1
makes no difference.
Input [Scene No.] in
01
binary format (0 to 31).
Input [Scene Group
11 No.] in binary format (0
to 31).
10 00000
10 00001
10 00010
10 01111
Input example
Input example:
10000000
Switching to
Scene 2
Input example:
10100010
Changing to
Scene Group 2
Input example:
11100010
Input example:
11000000
Input example:
11000001
Input example:
11000010
Input example:
11001111
Parallel Communications
2
333