Omron FH series User Manual page 321

4
Change the contents to be sent.
When switching between ON and OFF is performed, the changed contents are displayed on the monitors
of external devices. Make sure there are no problems.
Note
For the FZ5-1100 series, DO0 to DO7 of line 1 are assigned to the DO8 to DO15 parallel terminals. Therefore, if you
turn ON DO0 to DO7 to test line 1 communications, signals will be output on the DO8 to DO15 parallel terminals.
IMPORTANT
The status of the following signals for the FZ5 can be checked only on the [Communication confirmation] dialog box
for line 0.
• RUN, ERR, and BUSY
5
Click [Close].
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Parallel Communications
2
319