Omron FH series User Manual page 432

CPYSCENE or CSD
Copies the data for the scene with the number specified with command argument 1 to the scene with the number
specified with command argument 2. If there is already data at the copy destination, the copied data is written
over that data.
<Command format>
C P Y S C E N E
or
C S D
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Copy destination scene
No.
Copy destination scene
No.
(Example)
Copying the scene data for Scene 2 to Scene 10
<Command>
<Response>
430
Command Control
C
R
Copy destination scene No. (3 digits max.)
Copy source scene No. (3 digits max.)
C
R
Copy destination scene No. (3 digits max.)
Copy source scene No. (3 digits max.)
Specifies the scene No. to copy from (0 to the number of scenes in the scene group − 1).
Specifies the scene No. to copy to (0 to the number of scenes in the scene group − 1).
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)