Omron FH series User Manual page 229

Setting item
• [OFF]
User area
• ON
IMPORTANT
About Output data size and User Area
All line's Output data size and User Area are necessary to be equal when you select the Multi-line random trigger in
Operation mode.
4
Click [Apply] to apply the settings.
Click [Close] to close the System Settings Dialog Box.
IMPORTANT
PLC Connection Timeout Interval
Set the PLC connection timeout interval so that it is longer than the measurement processing time. For the timeout value,
refer to the IMPORTANT section on p.217.
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Set value
[Factory default]
Set whether to use the User Area that are user input area and user out-
put area.
• Data type of User Input Area 0 to 3 is DINT.
Data type of User Input Area 4 to 5 is LREAL.
• Data type of User Output Area 0 to 3 is DINT.
Data type of User Output Area 4 to 5 is LREAL.
Description
Communicating with EtherNet/IP
2
227