Omron FH series User Manual page 337

FZ5-11
Data Description
Performs measurement
Continuous continuously while
Measurement command is being
input.
Changes the
Select Scene
measurement scene.
Changes the
Set Scene
measurement scene
Group
groups.
Clears measurement
Clear
values.
Measurement
The OR signal and DO
Values
signal are not cleared.
Clears the error output.
Clear Error The ERROR indicator is
also cleared.
Clear Parallel Clears the OR signal
OR+DO and DO signal.
Clears the wait state in
Wait State
the control flow parallel
Clear
processing unit.
*1: To clear ERR (common) for an FZ5-series Controller, set the line number (DI4) to 0.
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Input format (DI7 to DI0)
Execute Command
(DI7) (DI6, DI5)
1 00
1 01
1 11
1 10
1 10
*1
1 10
1 10
Command
Line number
information
(DI4)
(DI3 to DI0)
*****
The Controller
does not see this
signal, so a
setting of either 0
or 1 makes no
difference.
Input [Scene
No.] in binary
format (0 to 15).
Input [Scene
Group No.] in
binary format (0
to 15).
0 or 1 Specify
the line number
to send the
command to. 0000
0001
0010
1111
Input example
Continuous
Measurement on
Line 1
Input example:
10010000
Changing Line 0 to
Scene 2
Input example:
10100010
Changing Line 1 to
Scene Group 2
Input example:
11110010
Clearing the
Measurement
Values of Line 1
Input example:
11010000
Clearing ERR
(Common)*
Input example:
11000001
Clearing the OR
Signal and DO
Signal of Line 1
Input example:
11010010
11001111
Parallel Communications
2
335