Omron FH series User Manual page 479

MOVSCENE or MSD
Copies the data for the scene with the number specified with command argument 1 to the scene with the number
specified with command argument 2. Deletes scene data with a number specified by command argument 1 after
completing copying. If there is already data at the copy destination, the copied data is written over that data.
<Command format>
M O V S C E N E
or
M S D
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Specifies the scene number to copy scene data from: 0 to the number of the scenes in the scene
Source scene number
group −1.
Specifies the target scene number for copying scene data: 0 to the number of the scenes in the
Target scene number
scene group −1.
(Example)
The following sample command moves the scene data saved under scene 2 to scene 10:
<Command>
<Response>
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
C
R
Target scene number (3 digits max.)
Source scene number (3 digits max.)
C
R
Target scene number (3 digits max.)
Source scene number (3 digits max.)
3
477
Command Control