Omron FH series User Manual page 477

When processing is not performed normally
<Parameters explanation>
The measurement results from the number of times continuous measurement is performed are
Measurement result output as a response.
Reference:
Completes continuous measurement
Continuous measurement ends.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
Note
• To output measurement results, insert a [Data Output] processing unit in the scene. When the scene does not have a
[Data Output] processing unit, only a command response is output.
Reference: Output Format (p.296)
Reference: Output Data Settings (Processing Item Registration) (p.184), (p.279)
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Output Format (p.296)
3
475
Command Control