Omron FH series User Manual page 362

File Load Commands
The load destination differs depending on the Sensor Controller model.
Load destination
RAMDisk
External memory
Loads the Scene data
Loads the scene group data
Loads system data
Loads System + Scene group 0 data
*1: You cannot execute tag data link commands. Execute the command with message communications.
File Save Commands
The save destination to use differs by Sensor Controller model.
When you use FH series/FZ5-1100 series, do not save to the any folder except RAMDisk and external
memory device (such as C:\ProgramFiles\FZ). It is possible not to perform correctly due to the decrease of
Scene data storage region.
Save destination
RAMDisk
External memory
Saves the Scene data
Saves the scene group data
Saves system data
Saves the image data
Saves all the image data in the image buffer
(specified with [main unit logging image]).
Saves the last logging image
Saves System + Scene Group 0 data in a file
Captures a screen
*1: You cannot execute tag data link commands. Execute the command with message communications.
360
Command Control
FH series/FZ5-1100 series
C:\Data\RAMDisk
E:\, F:\, G:\, H:\, M:\ (FH series only)
OK: Applicable command, RST: Command with restricted execution, NA: Non-applicable command
Function
FH series/FZ5-1100 series
C:\Data\RAMDisk
E:\, F:\, G:\, H:\, M:\ (FH series only)
OK: Applicable command, RST: Command with restricted execution, NA: Non-applicable command
Function
FZ5-L series/FZ5-600 series
\RAMDISK
\USBDisk to \USBDisk3
PLC link EtherNet/IP
Parallel Reference: Reference:
(p.201)
NA OK RST
NA OK RST
NA OK RST
NA OK RST
FZ5-L series/FZ5-600 series
\RAMDISK
\USBDisk to \USBDisk3
PLC link EtherNet/IP
Parallel Reference: Reference:
(p.201)
NA OK RST
NA OK RST
NA OK RST
NA OK RST
NA OK RST
NA OK RST
NA OK RST
NA OK RST
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Non-
procedure
EtherCAT
Reference:
(p.253)
(p.294)
(*1)
NA OK
(*1)
NA OK
(*1)
NA OK
(*1)
NA OK
Non-
procedure
EtherCAT
Reference:
(p.254)
(p.295)
(*1)
NA OK
(*1)
NA OK
(*1)
NA OK
(*1)
NA OK
(*1)
NA OK
(*1)
NA OK
(*1)
NA OK
(*1)
NA OK