Omron FH series User Manual page 471

LAYOUTNO or DLN
Gets or sets the current layout number.
IMPORTANT
• For non-remote operation, only 0: Local can be specified. For remote operation, only 1: Remote can be specified.
If any combination other than the above combinations is used, unexpected operation may occur when the command is
executed.
Getting the layout number
Gets the number of the currently displayed layout.
<Command format>
or
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
0: Local
Acquisition target
1: Remote
Layout number Current layout number (0 to 8)
(Example)
When the currently displayed window (local) is the RUN window
<Command>
<Response>
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
3
469
Command Control