Omron FH series User Manual page 361

Commands to Read Data
OK: Applicable command, RST: Command with restricted execution, NA: Non-applicable command
Function
Acquires unit data
Gets the current date and time.
Acquires system version information
Acquires settings related to image logging.
Gets the defined image logging folder name.
Gets the defined data logging folder name.
Gets the defined screen capture folder name.
Acquires the set image logging prefix
Acquires the set data logging condition
Gets the parallel DI terminal offset data that is set.
*1: You cannot execute tag data link commands. Execute the command with message communications.
Commands to Write Data
OK: Applicable command, RST: Command with restricted execution, NA: Non-applicable command
Function
Sets unit data
Sets the date/time.
Changes settings related to image logging
Sets the image logging folder name.
Setting the data logging folder name.
Setting the screen capture folder name
Sets the image logging prefix.
Sets the data logging condition.
Sets the parallel DI terminal offset data.
*1: You cannot execute tag data link commands. Execute the command with message communications.
*2: When you save data, the save destination differs depending on Sensor Controller model.
The save destination differ depending on the Sensor Controller type.
When you use FH series/FZ5-1100 series, do not save to the any folder except RAMDisk and external memory device
(such as C:\ProgramFiles\FZ). It is possible not to perform correctly due to the decrease of Scene data storage region.
Save destination
RAMDisk
External memory
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)
Parallel
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Parallel
NA
NA
*2
NA
*2
NA
*2
NA
*2
NA
NA
*2
NA
NA
FH series/FZ5-1100 series
C:\Data\RAMDisk
E:\, F:\, G:\, H:\, M:\ (FH series only)
PLC link EtherNet/IP EtherCAT
Reference: Reference: Reference:
(p.200) (p.253)
OK OK
*1
OK RST
*1
OK RST
*1
OK RST
*1
OK RST
*1
OK RST
*1
OK RST
*1
OK RST
OK OK
OK OK
PLC link EtherNet/IP EtherCAT
Reference: Reference: Reference:
(p.201) (p.253)
OK OK
*1
OK RST
*1
OK RST
*1
OK RST
*1
OK RST
*1
OK RST
*1
OK RST
OK OK
OK OK
FZ5-L series/FZ5-600 series
\RAMDISK
\USBDisk to \USBDisk3
Non-
procedure
Reference:
(p.83)
(p.294)
OK OK
NA OK
NA OK
NA OK
NA OK
NA OK
NA OK
NA OK
OK OK
OK OK
Non-
procedure
Reference:
(p.83)
(p.294)
OK OK
NA OK
NA OK
NA OK
NA OK
NA OK
NA OK
OK OK
OK OK
359
Command Control
3