Omron FH series User Manual page 386

FZ5-L/FZ5-600 series Sensor Controller
Terminal
Supported
bit
Line 0
BIT0 STEP0
BIT1 0
BIT2 DSA0
BIT3 0
BIT4 0
BIT5 0
BIT6 0
BIT7 0
BIT8 0
BIT9 0
BIT10 0
BIT11 0
BIT12 0
BIT13 0
BIT14 0
BIT15 0
IMPORTANT
• When the Multi-line Random Trigger mode is selected in the following series, usable signal type or assignment are differ
depending on the used number of Lines.
• FH-1000 series
• FH-3000 series
• FZ5-1100 series
For more details of Operation mode, refer to
• This command gets the terminal status of each line by specifying its port number.
When getting the terminal status of an unusable line, the response code will be OK and the response data will always be
0.
Verify the received data by changing the actual parallel terminal status.
384
Command Control
Multi-line Random Trigger Mode Signal Specifications (p.325).
Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)