Omron FH series User Manual page 498

Loads specified image data as registered image
Loads a specified registered image as a measured image. The status after the command is executed is the
same as after the operation is executed for the Read Button in the Registered Image Manager.
<Command format>
or
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Registered image number Specifies the registered image number: 0 to 999.
(Example)
The following sample command loads the image with registered image number 100 as a measured image.
<Command>
<Response>
IMPORTANT
• JPG(JFZ) format image files cannot be registered or loaded.
RESET
Restart the Sensor Controller.
<Command format>
<Response format>
None
496
Command Control Vision System FH/FZ5 Series User's Manual
for Communications Settings (Z342)