Carburettor; Controls - CITROËN ID 19 Repair Manual

OPERATION No. ID 142-3
: Overhauling a Sokx 34PBZC carburettor
ID 19
12
13
Insert provisionally the volume control screw (29). Fit the pump inlet valve (28) together with its filter (30) and
insert a copper gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screw in the idling air bleed (26), the pilot jet (25) and the pump jet (24) (insert a copper washer).
14
15
Screw in the starter air jet (23)
and the starter petrol jet (22) ( insert a copper washer). Screw the main jet (21)
into the carrier (20) and fit the carrier (20) inserting a fibre washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fit the accelerator pump inserting the gasket. Fit the washer (19) and the spring (18) and place the pin of pump
lever (17) in position.
16 Fit the throttle
(16)
on the carburettor body.
17
18
19
Fit the choke tube (15), tighten the locking screw. Fit the pump injector (12),
insert a paper joint and tighten the
screw. Place the emulsion tube (14)
in position and screw up the air corrector jet (13).
Fit the float (10) in position complete with its spindle (11). Fit the cover paper gasket. Secure the float chamber
cover (7) to the carburettor body. Tighten the fixing screws (spring washers under heads)
. . . . . . . . . . . . . . . .
Fit the washer (6), the bracket (3)
f or the set screws and fit screw (4 and 5) and the throttle control (2). Tighten
the nut. Fit and load the spring (1)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..I. . . . . . . . . .
The adjustment of Solex 34 PBIC carburettor is as follows :-
Type
Air Pilot Starter
Float
Choke
Main
Correction
Emulsion
Tube
Needle
Pump
Jet
Jet Air Jet
Fuel Jet Air Jet Fuel Jet
Weight Jet
.i
FRANCE
26 125 175 19 150 50 4 115 5.7 g 2 50
EXPORT 26 135 230 28 150 50 4 115 5.7 g 2 50
I
We strongly advise against any interference with this adjustment which was arrived at after many tests.
TOOLS
12 mm box spanner
12-14 mm box spanners
9 mm box spanner
12 mm box spanner