Replacement Of A Water Pump And Dynamo Belt; Replacement Of A Dynamo And Water Pump Driving Pulley - CITROËN ID 19 Repair Manual

ID 19 OPERATION No. ID 23 l-4 : Work on
the aullevs and beZt (
>.ID 231-4 127
4
5
6
7
8
9
10
11
12
REPLACEMENT OF A WATER PUMP AND DYNAMO BELT
Removal
Disconnect the flexible air hose from the radiator tie bar.
Unscrew the dynamo fixing screws.
Disconnect the tie bar from the dynamo and tilt the dynamo towards the engine. . .
I
12 mm box spanner
Release the dynamo belt from the driving pulley and from fan.
Refitting
Place the belt in position on the water pump pulley, pass it over the driving pulley on the left hand side and have an
assistant turn the engine in order to facilitate the engagement of the belt. Place the belt in position on the
dynamo pulley .
Tighten the belt. Replace the dynamo tie-rod.
Tighten the tie-rod fixing nut (plain and spring washers).
Tighten the
dynamo fixing screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the flexible air hose to the radiator tie bar. Fit a Ligarex clip (pliers 2483-T, see Pl.
REPLACEMENT OF A DYNAMO AND WATER PUMP DRIVING PULLEY
Removal (see Pl .49)
Disconnect and remove the battery.
Disconnect the flexible air hose from the radiator tie bar.
17, fig.2)
. . . . . . . . .
Unscrew the dynamo fixing screws.
Remove the dynamo tie bar fixing nut and withdraw the tie bar from the dynamo. .
Disengage the belt from behind the drive pulley.
Remove the pulley fixing screw (84), the spring washer and the spacer washer (116).
Disengage the pulley and withdraw from the left hand side of the car.
Remove the key (85) and adjusting
washer(l17) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..!~.~....
Refitting (see Pl. 49)
':'
Put in position the adjusting washer (117), the pulley and the- washer (116).
Tightenthe fixing screw(84) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Align the pulley (see Op.ID 231-O).
TOOLS
14 mm spanner or ring
spanner
12 mm box spanner
14 mm spanner or ring
s panne r
Pliers 2483-T
12 mm box spanner
14 mm ring spanner
14 mm spanner
14 mm spanner