CITROËN ID 19 Repair Manual page 147

ID
19 OPERATION No. ID 330- 1
: Replacement of the gearbox
Op.ID 330-l 145
32
33
34
35
36 Fit the battery tray. Fit and connect the battery.
Lower the car to the ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12 mm box spanner
37 Fill the radiator, with the engine running.
38 Bleed the front brakes (see Op.ID 453-O).
d)
Centre the radiator making sure that the fan blades do not touch the cowling.
Tighten the fixing screws of the radiator and the bracket.
e)
Fit the radiator tie-rod (plain and spring washers under the head of the screw).
Fit the heating and demisting
radiator and support assembly.
Tighten the fixing screws (plain and spring washers under heads). Connect
the flexible air hose to the radiator tie bar.
Fit a Ligarex clip (pliers 2483-T, see Pl. 17, fig.2) . . . . . . . . . . . . . .
Fit the exhaust down pipe. Tighten the collars*( spring washers)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . .
Fill the gearbox: 3.6 pints (2 litres SAE 90, EP oil).
Fit the brake disc cooling ducts.
Make sure that they do not touch the discs;
if necessary shift them slightly.
Fit the air deflector panel, the front wings,
the spare wheel support and the spare wheel.
12-14 mm spanners and
Refit the front wheels.
Tighten the screws to 108-144 ft.lbs (15-20 m.kg)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . box spanners
TOOLS
12-14 mm box spanners
Pliers 2483-T
12 mm box spanner