CITROËN ID 19 Repair Manual page 268

262
OPERATION No. ID 441-
1 : Replacement of a steering wheel
ID 19
2
9
REMOVAL (see P1.91).
1
2
Remove the battery and remove the battery tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 mm box spanner
With a dab of paint mark the position of the steering pinion opposite the slot in the steering coupling at "a" (see P1.90,
fig.3).
3
4
Remove the instrument panel cover.
Turn the steering wheel so that access can be had to the screw (4) of the fixing collar (5).
Unscrew the screw (4) (spanner 1994-T, see Pl. 91, fig. 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Unscrew the nut of the screw (39) coupling the steering column to the flexible coupling (10) and remove the screw.
Remove the steering column (see P1.90, fig. 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Remove the conical cup (39), the steel cup (41), the spring (3), the steel cup (40) and the collar (5).
REFITTING (see P1.91).
7
8
9
10
11
On the steering column fit: the collar (5), the steel cup (40), the spring (3), the steel cup (41) and the conical cup (39).
Fit the steering column in its bracket on the instrument board.
Engage the steering column pinion in the flexible coupling (lo), making sure that the mark (paint mark) is aligned
with the slot in the coupling (at 'la") (see P1.90, fig. 3). Insert the coupling screw (38) in the groove in the
pinion and tighten the nut (insert a spring washer)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Compress the spring (3) (compressor 1991-T, see P1.91, fig.1).
When the spring (3) is fully compressed tighten the screw (4) of the collar (5) ( p s anner 1994-T, see P1.91, fig.3).
Make sure that there is no play by alternately pulling and pushing on the steering wheel
. . . . . . . . . . . . . . . . . . . . . .
Fit the instrument panel cover.
Tighten the fixing screws (cup washers under the heads).
Fit the battery tray, fit and connect the battery
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PARTICULAR POINTS
Mark the position of the steering pinion (in relation to the flexible coupling) with a spot of paint opposite the slot in the coupling at "a"
(see Pl. 90,fig. 3).
After assembly make sure that there is no play by alternately pulling and pushing on the steering wheel.
TOOLS
Spanner 1994-T
12 mm box spanner
12 mm box spanner
Spring compressor 1991-T
Spanner 1994-T
12 mm box spanner