CITROËN ID 19 Repair Manual page 335

ID 19
OPERATION No. ID 642- 1 : Replacement of a heating and demisting radiator
Op. ID 642-l
REMOVAL
Drain the engine cooling radiator;
Remove the clip from the flexible air inlet hose and disconnect the hose from the heating and demisting radiator.
Remove the heating and demisting radiator fixing screws
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remove the rubber sleeve connecting the heating and demisting radiator to the air pipe.
Disconnect the flexible hot water inlet pipe from the radiator.
Disconnect from the radiator the lower flexible pipe
for the return of the water to the engine.
Remove the heating and demisting radiator.
REFITTING
Connect to the heating and demisting radiator the flexible lower pipe for the return of water to the engine and tighten
the clip. Connect the upper hot water inlet pipe and tighten the clip.
Fit the rubber sleeve connecting the heating and demisting radiator to the air pipe and tighten the radiator fixing
screws (plain and spring washers under the heads)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the flexible air inlet pipe to the heating and demisting radiators and fit the Ligarex clips (pliers 2483-T,
see Pl. 17, fig. 2)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
With the engine running fill the engine cooling radiator.
TOOLS
8 mm box spanner
8 mm box spanner
Pliers 2483-T