NEC Univerge sv8500 Manual page 1224

Δ
8. SET E_T_TIME
This command is used to specify the executing time of Echo Canceller Training Feature. To make this as-
signment effective, it is required to execute the "SAVE" command and to restart before exiting the mainte-
nance command.
MG-PRI > SET E_T_TIME 1
EC Training Feature Time setting succeeded.
9. SET Δ E_T_WAITTIME
This command is used to specify the waiting time before the Training Feature mode of Echo Canceller be-
gins. Echo Canceller Feature is used to prevent initial Echo (ranging from 500 to 1ms) from occurring in
the beginning of speech to PBX. To make this assignment effective, it is required to execute the "SAVE"
command and to restart before exiting the maintenance command.
MG-PRI > SET E_T_WAITTIME 0
EC Training Start Wait Timer setting
succeeded.
In order to make a setup reflect, re-starting
is required after saving a configuration file
by SAVE command.
Δ
P1
Δ P1
VOL.2-971
P1-Specify a executing time before the training feature starts
(ms)
0-32=Executing Time (1 counter indicates 10ms)
P1-Specify a waiting time before the training feature starts
(ms)
0-100=Waiting Time (1 counter indicates 10ms)
MG-PRI/PRA