NEC Univerge sv8500 Manual page 1034

6. SHOW HC_RCV_TIMER: Displays the current setting of Time-out value for Telephony Server health
check packet waiting process.
Displays the current setting of Time-out value for Telephony Server health check packet waiting process.
MG-BRI>show hc_rcv_timer
Health-Check Receive Timer Timeout is
150 seconds.
7. SHOW INTERFACE: Displays the current setting for speed and activation mode of Ethernet controller.
Displays the current setting for speed and activation mode of Ethernet controller.
MG-BRI>show interface
Ethernet Speed
100MBPS
8. SHOW LAN_ERROR_CHECK: Displays the interval to detect LAN cable fall-off.
Displays the interval to detect LAN cable fall-off.
MG-BRI>show lan_error_check
LAN Error Check Timer is 100 ms.
9. SHOW OWN_IPADDRESS: Displays the IP Address, Subnet Mask and Default Gateway currently
assigned.
Displays the IP Address, Subnet Mask and Default Gateway currently assigned.
MG-BRI>show own_ipaddress
IP Address Subnetmask
10.41.1.100 255.255.255.0
10. SHOW SIGNALING_PORT_NO: Displays the Signaling Port number currently assigned.
Displays the Signaling Port number currently assigned.
MG-BRI>SHOW SIGNALING_PORT_NO
Signaling port number is 64000.
DUPLEX
FULL
Default Gateway
10.41.1.127
VOL.2-781
MG-BRI