NEC Univerge sv8500 Manual page 1210

B LOC-ID
Displayed when TYPE=Location ID Specified is selected.
Specify the Location ID (IP terminals)
Setting of Jitter Buffer
JB_MIN:Jitter Buffer Minimum
JB_MAX:Jitter Buffer Maximum
Setting Type of Voice Packet Service
Specify QoS settings of Voice Speech
Setting of Payload
TYPE: Specify a Payload type to be used.
SIZE: Specify the Payload size to be used.
After registration is completed, reset MG-PRI/PRA (OFF
RESET THE MG SYSTEM BY TURNING OFF AND ON THE POWER, AFTER ASSIGNING DATA.
→ ON).
VOL.2-957
MG-PRI/PRA