NEC Univerge sv8500 Manual page 1268

4. Port Numbers
The following provides the port number to be used in MG(PRI). If a firewall is used in your network, do
not block the following ports.
• When using SIP mode.
PORT NO.
5060 SP-PHI
1024-64510 Peer to Peer
• When using Proprietary Protocol mode
PORT NO.
7500 Internal PHI-PRI
1024 ∼ Peer to Peer
1024 ∼ 64510 Peer to Peer
10001
3456 MG(PRI)
64000 ∼ 65024 Internal PHI-PRI
5. Available Channels When Using SIP Mode
The number of channels that are processed depends on codec and payload cycle used by MG(PRI) in SIP
mode. Therefore, adjustments will be needed, such as placing unnecessary channels into the Make Busy
status.
See VoIP Encryption [V-27] in Data Programming Manual - Business for the number of available channels
on the encryption status of this component.
PATH FUNCTION
↔
MG
PATH
← MG(PRI)
-
↔ DRS
→ MG(PRI)
VOL.2-1015
MG(PRI) (1.5M) [SCA-24PRIA/MG-24PRIA]
SIP Local console can modify the port number.
RTP Local console can modify the port number.
FUNCTION
iLP-PM
H.245
Can be changed by configuration com-
RTP
mand on local console
Preparation for
H.245
Can be changed by ADTM command
Registration Can be changed by configuration com-
mand on local console
iLP-PM Can be changed by ADTM command
NOTE
NOTE
-
-
-