NEC Univerge sv8500 Manual page 1001

• When DHCP Server is Enabled
There is no need to assign IP Address of MG-BRI, Default Gateway or the Telephony Server on MG-
BRI side when acquiring the network information from the DHCP Server, however, IP Addresses listed
below need to be assigned on DHCP Server side.
• Default Gateway
• IP Address and Port number of DRS
Confirm the number of IP Address stored on DHCP side to always ensure the IP Address of MG-BRI.
Note 1:
About IP address of DRS (Telephony Server), refer to "Registration Destination of IP Devices/Stations" in
Note 2:
INTRODUCTION of Installation Manual.
Assign the settings below from the "Add Option Type".
Note 3:
Item
Name There is no need to assign this field. Beware not to duplicate
with other options. (Assigned as "DRS" in this example)
Data Type IP Address
Array Check box: ON
Identifier 161
Comment -
Assignment with the DHCP Server
Add Option Type
Assignment
Class: Global
Name: DRS
DataType: IP Address
Identifier: 161
Comment:
OK
, ,
Note 1 Note 2 Note 3
Array
Cancel
VOL.2-748
Help
MG-BRI