NEC Univerge sv8500 Manual page 1025

[SET Command]
1. SET DEFAULT_GATEWAY: Assignment of Default Gateway.
Assign the Default Gateway.
Execute the "SAVE" command before finishing the maintenance command to reflect change.
Note:
2. SET DHCP: Assignment of DHCP
Assign whether to use DHCP Server or not.
MG-BRI>set dhcp P1
Execute the "SAVE" command before finishing the maintenance command to reflect change.
Note:
3. SET DRS_IPADDRESS: Assignment of IP Address and Port number of DRS Server.
Assign the IP Address and Port number of DRS. Only "Primary DRS" needs to be assigned here.
MG-BRI>set drs_ipaddress
Please enter DRS Unit(1:Primary/2:Secondary/
3:Tertiary/4:Forth): 1
IP Address: 10.41.1.150
Port Number: 3456
About IP address of DRS (Telephony Server), refer to Vol.1, Chapter 2, "2. IP Related Basic Programming"
Note 1:
in this manual
Execute the "SAVE" command before finishing the maintenance command to reflect change.
Note:
4. SET EXTERNAL_MUSIC_LEVEL: Assignment of external hold tone level control.
Assign input impedance of the external hold tone interface.
MG-BRI>set external_music_level
Input gain (0/1/2/3 = 0db/-10db/-15db/-20db): 1
Execute the "SAVE" command before finishing the maintenance command to reflect change.
Note:
P1: DISABLE/ENABLE
DISABLE=Not using DHCP Server (Default)
ENABLE=Using DHCP Server
Unit: Assign "1".
Assign the IP Address. Note 1
(e.g. 10.41.1.150)
Port Number: Assign within (0-65535)
(Default: 3456)
VOL.2-772
Level setting value (0-3)
0: 0 dB (Default)
1: -10 dB
2: -15 dB
3: -20 dB
MG-BRI