NEC Univerge sv8500 Manual page 1033

Fp85-110 s7
Hide thumbs Also See for Univerge sv8500:
Table of Contents

Advertisement

"MISC_ACT" and "MISC_0" - "MISC_7" are not used.
Note:
"CALL_HOLD" and "RTP_STOP_DETECT" appear when they are configured with the ADD VALUE
Note:
command, or when the MG-BRI is running firmware version: SP-3708 BRI BOOT PROG-A Issue 8 or lat-
er.
2.
SHOW DHCP: Displays the current setting of DHCP
Displays the current setting of DHCP
MG-BRI>show dhcp
DHCP is ENABLE
3.
SHOW DRS_IPADDRESS: Displays the IP Address and Port Number of DRS.
Displays the IP Address and Port Number of DRS.
MG-BRI>show drs_ipaddress
DRS Unit
IP Address
Primary DRS
10.41.1.150
Secondary DRS
10.41.1.150
:
About IP address of DRS (Telephony Server), refer to "Registration Destination of IP Devices/Stations" in
Note:
INTRODUCTION of Installation Manual.
4.
SHOW EXTERNAL_MUSIC_LEVEL: Displays the current setting of external hold tone settings.
Displays the current setting of external hold tone settings.
MG-BRI>show external_music_level
External Music on Hold Level Control is 1(5dB)
5.
SHOW FAX_DETECTION_TIME: Displays the current setting of effective switching time for FAX
Displays the current setting of effective switching time for FAX
MG-BRI>show fax_detection_time
FAX Enable Timer is 1 minute.
Port Number
3456
3456
:
:
VOL.2-780
This example shows the DHCP "Enable".
.
MG-BRI

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents