NEC Univerge sv8500 Manual page 1158

Setting DNS server IP Address:
--- DNS IP Address set ---
Current DNS IP Address: 0.0.0.0
Change DNS IP Address? [Y(change)/N(cur-
rent)/Q(quit)]: Y
Input new DNS IP Address: 10.41.1.150
This setting is required when DNS server is "E (enable)".
Note:
Setting IP Address and Subnet Mask of MG(BRI):
--- IP Address & Subnetmask set ---
Current IP Address: 0.0.0.0
Current Subnetmask: 0.0.0.0
Change IP Address & Subnetmask?
[Y(change)/N(current)/Q(quit)]: Y
Input new IP Address: 10.41.1.100
Input new Subnetmask: 255.255.255.0
Do not assign network address and broadcast address for MG(BRI) setting. See the examples below:
Note:
(Example 1) Network address cannot be assigned as IP address of MG(BRI).
IP address: 192.168.1.0
Subnet mask: 255.255.255.0
(Example 2) Network address cannot be assigned as IP address of MG(BRI).
IP address: 172.16.0.0
Subnet mask: 255.255.0.0
(Example 3) Broadcast address cannot be assigned as IP address of MG(BRI).
IP address: 192.168.1.255
Subnet mask: 255.255.255.0
(Example 4) Broadcast address cannot be assigned as IP address of MG(BRI).
IP address: 172.16.255.255
Subnet mask: 255.255.0.0
The current setting is displayed.
Asked whether to change the displayed setting.
Y=change
N=not change
Q=quit this setting
Enter new IP address of DNS server (e.g. 10.41.1.150)
The current setting is displayed.
Asked whether to change the displayed setting.
Y=change
N=not change
Q=quit this setting
Enter new IP address of MG(BRI) (e.g. 10.41.1.100)
Enter new Subnet Mask (e.g. 255.255.255.0)
VOL.2-905
MG(BRI) [SCA-2BRIA/MG-2BRIA]