NEC Univerge sv8500 Manual page 1150

SHOW Command
1. SHOW CONFIG
Displays the list of current configuration data.
MG-BRI>show config
[CONFIG]
LAN_SPEED=AUTO
DHCP=ENABLE
OWN_ADDR=0.0.0.0
SUBNET_MASK=0.0.0.0
DEFAULT_GATEWAY=0.0.0.0
SIPSV_ADDR1=0.0.0.0
SIPSV_PORT1=64000
SIG_QOS=1,0xC0
SIGNALING_PORT=64000
START_PORT=1024
VLAN_NUM_1=0
FAX_TIME=1
MUSIC_LEVEL=0
SMOOTH_PAD=1
LAN_ERROR_CHECK=1000
HC_RCV_TIMER=150
WARNING_TONE_CONTROL=3
SINT_MODE=0
CALL_HOLD=ENABLE
RTP_STOP_DETECT=3
2. SHOW DEFAULT_GATEWAY
Displays the current setting of Default Gateway
MG-BRI>show default_gateway
Default Gateway is 10.40.1.254
3. SHOW DHCP_SV
Displays the current setting of DHCP server.
MG-BRI>show dhcp_sv
DHCP is ENABLE
.
This example shows the DHCP server is "Enable."
VOL.2-897
MG(BRI) [SCA-2BRIA/MG-2BRIA]